Back-injection of the senotop
- film for interior applications with ABS and ABS/PC Blend has shown very good results to date.
| Requirements of the Automotive Industry | Performance of senotop |
| UV - stability | The top layer of the film is PMMA. PMMA is the most UV stable thermoplastic within the plastic sector. PMMA shows no change in mechanical or in optical properties, even after external exposure of many years. > chart right: colour deviations are visible to the human eye at a Delta E-value greater than 1,0. see "colour-development" |
| Scratch and Abrasion Resistance | senotop - films for interior show an excellent and long lasting surface quality. Testing according to BMW-Norm GS97034 with test control unit ABREX®: Standard test requirement: resistance of > 60 strokes undamaged senotop - result: resistance of 250 strokes undamaged |
| Optical properties | The surface shows a high gloss level and very low Longwave (LW)- and Shortwave (SW) - values compared to paints. |
The mechanical and thermal values of the film can be taken from the relevant technical data sheet. Current data sheets are available on request at Senco (Europe):
officesenco-europe.net
print page
